Getting Started Manual

Hardware Names & Locations

Powering Up

PINFERNO should power up as soon as you plug in the power cord. However, if it is already plugged in or there is an unexpected power loss, you may turn it on by lightly tapping the power switch, located under the cabinet near the front and to the right (see image)

Tip: If the power has been unexpectedly cut, you may have an issue with screens where one is on but another is off. If this is the case, you'll see a message on the backglass on how to proceed. Specifically, you will be instructed on how to perform a hardware reboot. Follow the instructions on the backglass to reboot.

Selecting a Table to Play

Once PINFERNO has powered up, use the flipper buttons to cycle left and right through the HyperPin menu. The selected game will appear at the top centre along with its logo enlarged. To play the selected game, press the green Start button.

Playing a Table

For machines without a coin door

1.) First press the white "P1" button - you'll hear the sound of a coin dropping.
2.) Press the green "Start" button - a ball will appear in the launch ramp.
3.) Press "Fire" to launch the ball.

Tips:

- Use the red left & right flipper buttons to control flippers.
- Use the black left & right nudge buttons to nudge the table - this will help you make trick shots!

 

For machines with a coin door

1.) Insert a coin in the P1 coin slot
2.) Press the green "Start" button - a ball will appear in the launch ramp.
3.) Press "Fire" to launch the ball.

Tips:

- Use the red left & right flipper buttons to control flippers.
- Use the black left & right nudge buttons to nudge the table - this will help you make trick shots!

Exiting/Quitting a Table

1.) Press the red "Exit" button. The Game Menu will appear.
2.) Use the red left & right flipper buttons to move through the menu.
      a.) Select "Back" to return to the game
      b.) Select "Exit" to exit the table and return to the HyperPin menu
3.) Press the green "Start" button to confirm your choice.

Shutting Down

1.) Press the red "Exit" button. The Main Menu will appear.
2.) Use the red left & right flipper buttons to move through the menu.
      a.) Select "Back" to return to the menu.
      b.) Select "Exit" to exit all pinball functions and be taken to Windows.
      c.) Select "Shutdown" to safely shut down the machine.
3.) Press the green "Start" button to confirm your choice.

Adjusting Volume

1.) Start any game to hear sound and use for testing
2.) Unlock the rear of the cabinet and open the door
3.) Locate the black audio dial on top of the computer
4.) Turn the volume dial until the desired sound volume is reached
5.) Close and lock the cabinet door















PINFERNO Pinball is proudly designed & assembled in Canada by Storm Applied Technologies
Copyright © 2017-2019 Storm Applied Technologies - All rights reserved